[ThumbSkull]

Looks like some of us that flew or saw c/f's Revolto in action may have to get one.
Definitely on the Bro approved foamy list.
I'm just going to hope Mike (or anyone else) will post here what his setup was, as it seemed perfect, for all to replicate.

Motor

Prop

Servos

Battery

 

[c/f]

MOTOR 900KV (option)
https://brotherhobby.com/avenger-2812-v3-p00133p1.html

ESC (5.3VDC set BEC) (12pole) (25 Frequency)
https://www.graupner.com/Brushless-Cont ... metry.html

Prop (CW or CCW does'nt matter except when TorQ Rolling) :mrgreen: Thatz something getting used tooo
https://www.allerc.com/graupner-eprop-c ... -9087.html

BATTERY (Dual voltage if you dont have a HV charger)
https://hyperion-world.com/en/charger-b ... -4-35-4-2v

SWERVOS
https://alofthobbies.com/mks-ds6100-servo.html

I would like to see others variants posted in this same format with notes on internal settings on ESC

 

[smallfly]

Mines just the "heavy" more powerful version that twisted sells except I had my own esc. Mine weighs the same as c/f's and Im happy with the power, it's pretty quick on an upline from hover. I use 1000ma glaciers

 

[c/f]

FACTORY SETUP LITE (RESERVED)

MOTOR

ESC

Prop

BATTERY

SWERVOS

 

[c/f]

FACTORY SETUP POWA (RESERVED)

MOTOR

ESC

Prop

BATTERY

SWERVOS

 

[McDDD]

Here's my setup. Not as light as c/f''s, but still works great, and I already had them.

Motor - ST .10, 1240kv

ESC - Hobbywing 40A

Prop - GWS 10x6

Servos - TowerPro 90MG digital on tail, TowerPro 90MG on ailerons

Battery - 3S 1300

CG - 1.5" behind wing spar

 

[sparkplug]

ok where you get one,how much,what its look like,maybe a pic,remember down south,s.c. way out of town,enfo hard to come by,plus im way behind on 3d stuff.need a good ,strong plane to learn on.

 

[ThumbSkull]

ok where you get one,how much,what its look like,maybe a pic,remember down south,s.c. way out of town,enfo hard to come by,plus im way behind on 3d stuff.need a good ,strong plane to learn on.

Here's one place.
https://twistedhobbys.com/th-39-epp-revolto-green/

 

[McDDD]

ok where you get one,how much,what its look like,maybe a pic,remember down south,s.c. way out of town,enfo hard to come by,plus im way behind on 3d stuff.need a good ,strong plane to learn on.

You watched me fly mine at Eldon. It was the green and white foam plane.

 

[ben_beyer]

Is there a link for the Revolto?

 

[gus]

ok where you get one,how much,what its look like,maybe a pic,remember down south,s.c. way out of town,enfo hard to come by,plus im way behind on 3d stuff.need a good ,strong plane to learn on.

Here's one place.
https://twistedhobbys.com/th-39-epp-revolto-green/

Here

 

[ben_beyer]

ok where you get one,how much,what its look like,maybe a pic,remember down south,s.c. way out of town,enfo hard to come by,plus im way behind on 3d stuff.need a good ,strong plane to learn on.

Here's one place.
https://twistedhobbys.com/th-39-epp-revolto-green/

Here

Ok, I thought it might be the Twisted Hobbys but it sounded like it was possibly a new balsa design.

 

[MRMcFarlandM]

Motor V/H E400 1200KV

ESC HOBBY WING 30 A

PROP GWS 10X6

SERVOS CORONA DS-843MG

BATT 1300 3S TURNIGY

Weight W/O batt 14.2 oz.

 

[HazzBro]

Gotta say it's the BEST foamie I've ever flown! Waterfalls and knife edge spins were crazy tight!

Only problem is the total cost. You could easily get close to $500 into a foamie!

Anyone have a total with a VH power system?

 

[sparkplug]

500 in a foam plane,naw,but then rc ant cheap.

 

[ben_beyer]

500 in a foam plane,naw,but then rc ant cheap.

There's a lot of truth to that.

 

[the lift]

Pretty much the same setup the ole Bouncer's, Primo 15's, EE25's used.

 

[MRMcFarlandM]

I don't even have 200 in mine. plane $125, motor $6, esc $12, servo's $9X4.

 

[Dunedin1]

Plane is $125, TH power pkg is $150-165, cheaper if you substitute your own parts,

 

[ThumbSkull]

It's possible that some of us that don't appreciate foamys, haven't set them up as well as the balsa planes they fly.