The Profile Brotherhood RC Forum banner

Demuirgi (E-power)

2210 Views 55 Replies 18 Participants Last post by  dhooks
Ive had this design for a few months now but after some changes and my first one is so worn i decided to build a new one, with a diff airfoil again. this will be a fast thread. :D

Attachments

See less See more
1 - 20 of 56 Posts
3
more wing

Attachments

See less See more
4
ran out of good 1/16 so i started the fuse :x

this is all for tonight

Attachments

See less See more
Sweet looking plane.

Run down the power system again for me and the projected weight.
spastic said:
this will be a fast thread. :D
Trying to snaek one in before the hijackers see it?? :lol: :lol:
Nice work Spas.... I appreciate a good build thread!!
Trying to snaek one in before the hijackers see it??
Na, ... just want to get this flying ASAP, my first one is toasted and there is still some flying weather left :D

Here you go Quinn
spaz mount axi2808/24 10x3.8apc sf
2500mAh tanic 3s1p
CC 35Amp
the axi draws 27amps on fresh charge max
15min flights without trying
42 oz thrust, nothing gets hot
~7.5oz airframe covered with ultracote light
~22oz AUW
4 hs-56
36"span, about that in length
batt in the wing for thrust line ballance
and a partridge in a pear tree...
my axi 2808 weighs 2.6oz with wires and connectors (on my dig scale)
See less See more
I appreciate a good build thread!!
I tried starting one of those once. Didn't last long and spiralled way out of control as I recall :lol:
Nice work Spas.... I appreciate a good build thread!!
thanks :D i appreciate this forum, RCwho?
Jimmy and Quinn are the Man :D
Great work....Spaz strikes again....
3
i think i need to figure a better way of doing, this i'm getting sick of capstrips :no: next one i may design for no sheeting/caps.. here is the wing it done just ailerons rudder and stab to go, maybe tomorrow
you can see the battery box, lots of room for options :D

Attachments

See less See more
my 36 inch Katana has no sheeting or cap strips. I hate them too. The wing is very solid and holds up to a lot of punishment and high G stuff.

I hate doing all that too.
Is there a way to get the plans on this bird???
BBill
Im working on some things Bill :wink:
i'll be finishing this up this weekend, i just got the covering for it :D
Ive got a little time, Need to sell a couple of kids to get the Lehner anyway.. :lol:
Need to sell a couple of kids to get the Lehner anyway
you live on a goat farm?
:lol:
No! Thats Auger.. :lol:
spastic said:
Need to sell a couple of kids to get the Lehner anyway
you live on a goat farm?
:lol:
No, Bill prefers sheep..... :p
Yuk it up, mofos! Auger has motors and servos and ESC's and RX's and batt'ries and all the bidness for a plane just settin' here. I'd let you look...but not touch...if'n you was here.

Besides, I'm sure Spastic would feel better if'n you slapped an Axi on his rig. A Lehner might blow it up like a dandelion in a dust devil :D
You get any coverin' done Spas? This is a pretty kick ass little bird you got..
1 - 20 of 56 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top