The Profile Brotherhood RC Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
239 Posts
Discussion Starter · #1 ·
Hi Guys,
My Hacker threw a magnet last weekend, so I am looking for new motor for my MOJO I was running a 17in prop on 8s. The plane RTF weighs about 8.5 lbs any ideas?
Thanks Mike,
 

·
Registered
Joined
·
239 Posts
Discussion Starter · #4 ·
I am looking at the badass motors but haven't decided between the 4530 and 4520. One a little heavier than I wanted and the other is a little lighter.

concerning the Motorflywhat are the dimensions I couldn't find the 4325 in the charts? If it is like the other motorfly's I have had it will be too large in diameter and short in length.

thanks for your thoughts Mike,
 

·
Registered
Joined
·
2,366 Posts


MOTROLFLY DM-4325 Brushless motor series are for RC Airplanes 8 to 16 pounds depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.

Motor comes with out connectors, we find it more important to direct solder the motor wires to the ESC.

All motors come with an X mount for mounting the motor to the fire wall, and a 8mm Hub prop adaptor
motorfly, motrofly, brushlessrs motor

  • Weight: 455 grams
  • All up weight 500 grams
  • Stator Width: 43mm
  • Stator Height: 25mm
  • Motor Width: 54.8mm
  • Motor Length: 52mm
66.3mm X mount to Hub face
  • Hub Length: 38.5mm
  • Hub Shaft: 8mm x 30mm
  • Motor Shaft Size: 6mm
  • 12 tooth 14 magnet DLRK



The X mount on
the 4320 and 4325
is not meant to be removed
Please download and print
this template instead. One will
be provided in the motor box.

4320, 4325 X mount
 
1 - 5 of 5 Posts
Top