The Profile Brotherhood RC Forum banner
41 - 46 of 46 Posts

· Registered
Joined
·
12,725 Posts
Certainly not the cheapest set up, but it is ballistic......
Motrolfly 3615-570KV, Xoar or Sail wood 14X7 E Prop, Castle Edge lite 75, 2 2200 or 2600 3S lipo's in series. 2600's are an ounce heavier each. My Stix 46 is 4 lb 1 oz with 2200's and 4lb 3 oz. with 2600's but it flys the same.
I did a couple of nostalgic slabs recently - 1 was the Infamous Gator Skin Chakk, the other was my HIGHLY repaired 1st Mojo. Both birds came out at 4 3/4 lbs RTF and have this system and even at that weight they have scream for the sky vertical.
Even tho' I love this system, I've flown some Bro's 4S systems that are phenomenal - especially Prowlers Jeide built Primo.
 

· Registered
Joined
·
608 Posts
Discussion Starter · #42 ·
Got the new motor installed on the Doug g slick 46. Trying to keep this plane light and on 3s I went with the bad ass 2820 1350kv . Finished weight fully loaded with battery, my slick 46 weighs in at 3lbs even. I tried a 11x5.5 prop first. It hovers at half throttle, feels like good pull out making 650 watts drawing 60amps. Really looking forward to the maiden flight!
Triangle Road surface Wood Grass Tints and shades
 

· Registered
Joined
·
12,725 Posts
That's a great weight! Looks great too!!! (y) (y) 😁 😁
 

· Registered
Joined
·
608 Posts
Discussion Starter · #46 ·
Got a list of BA motors I’ve tried recently and plan on posting what they were used for. Battery and prop. Just did a Dirty Birdy for a friend of mine on 6s and that sucker haul’s the mail!
 
41 - 46 of 46 Posts
Top