evo cap 50 build discussion

Re: evo cap 50 build discussion

PostPosted: Mon Jan 05, 2015 5:04 pm

This is what I have in mine.
Savox SV0220MG High Voltage Standard Digital Servo 0.13/111.1 at 7.4

After running the Solar770's in my Slide48, I would see no problem with running them.

Since you have the 8411's, that would be a great servo to throw in this plane.
Motowncali
Pro Bro
 
User avatar
 
Posts: 4249
Joined: Thu Oct 17, 2013 4:17 pm
Location: Crowley, TX

Remove Advertisements

TheProfileBrotherhood.com
Advertisement
 

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 9:33 am

Would a g32 4s set up work with this kit? I see most are using a 6s with this one. I'm still deciding on what slab to be my first efag kit. I already have motor, esc and battery, it's time for a kit.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 10:47 am

byoung wrote:Would a g32 4s set up work with this kit? I see most are using a 6s with this one. I'm still deciding on what slab to be my first efag kit. I already have motor, esc and battery, it's time for a kit.


I'm no EFAG specialist so I'm no help to you. Buy one for me though and I will test it out with a 55ax on it. :mrgreen:
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6871
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 11:12 am

Putting a saito hunnert on mine.
RIP Duke, Daddy loves you ALWAYS!
Thumbskull "Wulfie is the Liberace of ProBro's". RIP John, you are missed Brother.
Mchone Jake. "My gym teacher touched me! I didn't mind it"!
Evan Shadix. "wish apc had a trade in program"!
rcaircraftnut
Pro Bro
 
User avatar
 
Posts: 11918
Joined: Thu Feb 18, 2010 10:24 am
Location: Rural Oklahoma

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 12:07 pm

byoung wrote:Would a g32 4s set up work with this kit? I see most are using a 6s with this one. I'm still deciding on what slab to be my first efag kit. I already have motor, esc and battery, it's time for a kit.


If its an early high KV G32 it will be "ok", especially if built light. I run 4S setups on mine. I prefer a motrolfly 3620-800 or exceed rocket motor for more "oomph" myself since all the G32's seem to be a little soft on power.
www.texas-hobbies.com

The Texas hitman
iBang
Pro Bro
 
User avatar
 
Posts: 9612
Joined: Mon Aug 16, 2004 12:12 am
Location: Houston TX

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 12:35 pm

Sure a G32 will work. If it's the hot wind it'll be fine as that's what my 5lb MadCap 50 had on it. It wasn't ballistic, but it was plenty to get out of trouble. 4S 4000mah packs got me 6 minutes.

My 5lb GBR50 Bipe also has a G32, but it's not the hot wind. It's enough, but at times leaves me wanting just a little more.
If You MUST Burn The American Flag Please INHALE DEEPLY After It's Lit
whtbronco
Pro Bro
 
User avatar
 
Posts: 8015
Joined: Sun Oct 09, 2005 5:04 pm
Location: Winchester, VA

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 12:43 pm

iBang wrote:
byoung wrote:Would a g32 4s set up work with this kit? I see most are using a 6s with this one. I'm still deciding on what slab to be my first efag kit. I already have motor, esc and battery, it's time for a kit.


If its an early high KV G32 it will be "ok", especially if built light. I run 4S setups on mine. I prefer a motrolfly 3620-800 or exceed rocket motor for more "oomph" myself since all the G32's seem to be a little soft on power.


Ok I have a exceed rocket 900. Do you have one in stock?
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 12:58 pm

The exceed will be a good match. I flew a newer g32 on an original MadCap, about 5lbs AUW, it flew fine but left a little to be desired in pull out. The Evo comes in lighter and the exceed outperforms the g32, I think it will be a great match
slabs....
A.D.3D
Pro Bro
 
User avatar
 
Posts: 3762
Joined: Tue Jun 15, 2004 4:45 pm
Location: Edgewater, FL

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 7:56 pm

How much is the evocap? I don't see a price anywhere on the site.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6871
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 8:59 pm

I have gotten really lucky today I found a Bro that would sell me theirs. If I'm not mistaken I believe Ian and backslider had a limited run on this kit.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Tue Feb 17, 2015 9:09 pm

Nice well enjoy it. Nothing like the fuse outline of a cap.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6871
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: evo cap 50 build discussion

PostPosted: Wed Feb 18, 2015 12:04 am

Ian said that he would be looking at another run in the future sometime if there's enough interest.
RIP Duke, Daddy loves you ALWAYS!
Thumbskull "Wulfie is the Liberace of ProBro's". RIP John, you are missed Brother.
Mchone Jake. "My gym teacher touched me! I didn't mind it"!
Evan Shadix. "wish apc had a trade in program"!
rcaircraftnut
Pro Bro
 
User avatar
 
Posts: 11918
Joined: Thu Feb 18, 2010 10:24 am
Location: Rural Oklahoma

Re: evo cap 50 build discussion

PostPosted: Wed Feb 18, 2015 1:04 pm

What 'nut said. The intention has been to get my CNC running and cut kits myself as needed instead of doing big runs periodically, however I've been so busy that I haven't had time to get the cutter into operation. Since there seems to be some interest in them again I think it might be time to do another run.

I'm extremely busy Through early may (hobro) but after that I could see taking the time to put together another run of kits.
www.texas-hobbies.com

The Texas hitman
iBang
Pro Bro
 
User avatar
 
Posts: 9612
Joined: Mon Aug 16, 2004 12:12 am
Location: Houston TX

Re: evo cap 50 build discussion

PostPosted: Wed Feb 18, 2015 1:45 pm

:rockon: :clap: :superhappy:
RIP Duke, Daddy loves you ALWAYS!
Thumbskull "Wulfie is the Liberace of ProBro's". RIP John, you are missed Brother.
Mchone Jake. "My gym teacher touched me! I didn't mind it"!
Evan Shadix. "wish apc had a trade in program"!
rcaircraftnut
Pro Bro
 
User avatar
 
Posts: 11918
Joined: Thu Feb 18, 2010 10:24 am
Location: Rural Oklahoma

Re: evo cap 50 build discussion

PostPosted: Wed Feb 18, 2015 1:55 pm

Very nice.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Sun Feb 22, 2015 9:24 pm

I received my kit today and I stoked. This is another very nice kit, it came with a carbon fiber strip and control horns. I really like getting horns with a kit. Maybe I can build it this week! I'll post a few pics as I build.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Sun Feb 22, 2015 10:53 pm

byoung wrote:I received my kit today and I stoked. This is another very nice kit, it came with a carbon fiber strip and control horns. I really like getting horns with a kit. Maybe I can build it this week! I'll post a few pics as I build.


Good luck on it. Can't wait to see pics. Makes me a bit jelous. I would love to have one of these as well.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6871
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: evo cap 50 build discussion

PostPosted: Sun Feb 22, 2015 11:10 pm

cbarnes0061 wrote:
byoung wrote:I received my kit today and I stoked. This is another very nice kit, it came with a carbon fiber strip and control horns. I really like getting horns with a kit. Maybe I can build it this week! I'll post a few pics as I build.


Good luck on it. Can't wait to see pics. Makes me a bit jelous. I would love to have one of these as well.



I'm glad Ian will provide more kits in the near future. I believe this is a kit worth investing in.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

Re: evo cap 50 build discussion

PostPosted: Mon Feb 23, 2015 12:08 am

byoung wrote:
cbarnes0061 wrote:
byoung wrote:I received my kit today and I stoked. This is another very nice kit, it came with a carbon fiber strip and control horns. I really like getting horns with a kit. Maybe I can build it this week! I'll post a few pics as I build.


Good luck on it. Can't wait to see pics. Makes me a bit jelous. I would love to have one of these as well.



I'm glad Ian will provide more kits in the near future. I believe this is a kit worth investing in.


Yeah I'm sure it is worth it. I only gots the funds for one kit at the moment though and I'm holding out for the stix 51. McDDD just made it look like so much fun.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6871
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: evo cap 50 build discussion

PostPosted: Mon Feb 23, 2015 7:42 am

I agree completely the stix 51 video was incredibly, Dave sold me on that kit too.
byoung
Pro Bro
 
User avatar
 
Posts: 610
Joined: Wed Aug 20, 2014 9:35 am
Location: Birmingham, Al

PreviousNext

Return to Texas Hobbies

Who is online

Users browsing this forum: No registered users and 1 guest