I have this darn Miniature aircraft Concept 30 that I can’t unload for any price so I might as well fly it.
I’ve never setup a heli before. I’ve flown quite a few but they were BNF/RTF blade400’s and such so I can fly I just don’t know about setup.
Can anyone help me setup the radio and both fuel tanks?
Pix here: https://www.rcgroups.com/forums/showthr ... class-heli
Help with nitro setup
17 posts
• Page 1 of 1
Help with nitro setup
Posted: Mon Aug 27, 2018 2:53 pm
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 6:16 pm
I can help but really tough to do long distance! Nash setup and fly?
Matt
Matt
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 7:21 pm
That would be cool.
You wouldn’t have a starter adapter, would you? If not I’ll get one ordered.
You wouldn’t have a starter adapter, would you? If not I’ll get one ordered.
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 7:40 pm
WoodPilot wrote:That would be cool.
You wouldn’t have a starter adapter, would you? If not I’ll get one ordered.
Let me look through my junk box. Miniature always used a goofy start shaft that worked on that bare 6mm shaft.
Matt
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 7:42 pm
I think it’s a regular hex adapter. It’s an os .37 engine. I’ll get it down and get a pic.
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 8:15 pm
No luck on start adapter and I gave away all my old MA flex shafts 3 or 4 years ago.
Matt
Matt
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 9:04 pm
Just get a long Allen wrench and chuck it up in the drill.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"
Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46
Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46
- BalsaDust
- Pro Bro
-
- Posts: 6866
- Joined: Tue Feb 19, 2013 12:33 am
- Location: Somewhere in the USA
Re: Help with nitro setup
Posted: Mon Aug 27, 2018 11:31 pm
Nice little heli.it will have a shit load of power 
i would remove the governor,and use a throttle curve.that governor is a pain in the ass to setup 
i would remove the governor,and use a throttle curve.that governor is a pain in the ass to setup athol probro stickbangers club
"There is room in the Hood for everyone, but not everybody finds a home in the Hood"
- goofy-
"Best part is if you dork a harrier from a few feet up, it's like a decent CJ landing" -steener-
"There is room in the Hood for everyone, but not everybody finds a home in the Hood"
- goofy-
"Best part is if you dork a harrier from a few feet up, it's like a decent CJ landing" -steener-
- doinkedit
- Pro Bro
-
- Posts: 2455
- Joined: Fri Jul 08, 2011 4:13 pm
- Location: north idaho
Re: Help with nitro setup
Posted: Tue Aug 28, 2018 5:27 am
When you said start adapter, did you mean the start shaft for your electric starter or the hex socket that goes on the end of the clutch/engine shaft? I definitely have an extra start shaft that plugs into your rubber spinner cone.
Matt
Matt
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Tue Aug 28, 2018 6:25 am
WoodPilot wrote:Yea the shaft for electric starter.
Gotcha covered!
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Tue Aug 28, 2018 11:06 am
Cool. I’ll order one for myself if I don’t Ironman this thing lol
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
Re: Help with nitro setup
Posted: Tue Aug 28, 2018 12:20 pm
You can have the one I’ll bring. I don’t use it. Just taking space in my flight box.
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Mon Sep 03, 2018 8:30 pm
Matt and Mo, is this how I need to setup my tanks? https://youtu.be/rN-XCZqzyCU
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
Re: Help with nitro setup
Posted: Tue Sep 04, 2018 6:23 am
WoodPilot wrote:Matt and Mo, is this how I need to setup my tanks? https://youtu.be/rN-XCZqzyCU
Yes, pretty much, although the video didn’t give a good diagram of the plumbing.
Carb to clunk line of header tank. Vent of header tank to clunk line of main tank. Vent of main tank to muffler pressure.
Matt
SOME PEOPLE ARE LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS.
- basmntdweller
- Pro Bro
-
- Posts: 6437
- Joined: Mon Mar 08, 2004 9:24 pm
- Location: USA, Indiana, Indianapolis
Re: Help with nitro setup
Posted: Tue Sep 04, 2018 8:13 am
Simple. Just basically throwing the header tank between the main and engine.
- WoodPilot
- Pro Bro
- Posts: 19916
- Joined: Mon Mar 24, 2008 7:10 am
17 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests