G10 control horn run - Taking orders through Dec 27

[joebob]

Had a little interest in another batch of the G10 control horns. Thinking of doing a run if there is enough interest. Last time I did three different sizes: 40-60, 30cc, and 50cc. Will probably stick to one or two sizes this time, depending on interest.

Let me know if you'd like some. I figure $5 for a set of 40-60 size (5 horns w/ backplates), $7 for a 50cc set, $14 if you want double truss ones. Shipping will be whatever it costs for a padded envelope.

[Montana3D]

Put me down for a set of 40-60 and 50cc size.

[jrr]

I’d be in for 3 sets 40-60 and one set 30cc if you do the run. Thanks

[kamlooper]

Interested, anyone have pics of them?

[gus]

I’ll take some 40-60 size

[iceman1]

Is double truss possible on the 40-6ize?

[gus]

I’d be in for 3 sets 40-60 and one set 30cc if you do the run. Thanks

Those are the ones Ted/James were offering at the time:

viewtopic.php?f=2&t=36031&p=777032&hilit=control+horn#p777032

[joebob]

Here's a shot of the sizes for each.

I can do double truss for the 4-60 size. Might be a little overkill. Only difference is the backplate.

For info, these are made from .060 G10.

[smallfly]

Id take a set of the 40-60

[joebob]

Looks like there's enough interest to proceed with a run. So I can keep track of who wants what, please send me a PM to get on the list, and specify what size and how many sets you want. One set includes 5 horns and 5 backplates. IF you want double truss please specify this. Double truss will include 10 horns and 5 double slot backplates.

Prices are as follows: (NOTE: does NOT include shipping.) These will be mailed first class in a padded envelope. Shipping cost will include the cost of the envelope and shipping charge. I will let you know how much when I get your address.

40-60 size single: $5/set
40-60 size double: $10/set
30-50CC size single: $7/set
30-50CC size double: $14/set

I will be cutting stuff over the holiday break, so order cutoff will be next Sunday, Dec 27.

Thanks!

[Motowncali]

Please put me down for 2- set of 30cc double truss horns.

Mo

[iceman1]

Put me down for 2 sets 40-60 double truss and 3 sets regular 40-60.
Thanks for doing this.

[Motowncali]

Put me down for 2 sets 40-60 double truss and 3 sets regular 40-60.
Thanks for doing this.

You building or hoarding iceman?

[ThumbSkull]

PM sent.
I'll take a set of 30cc single and 4 sets 40-60 size.
Mike

[iceman1]

Put me down for 2 sets 40-60 double truss and 3 sets regular 40-60.
Thanks for doing this.

You building or hoarding iceman?

I still have a Primo kit the rest are hording/hoping....

[cartman]

Pm sent for 2 sets 50cc double truss.

Thanks!

[kamlooper]

pm sent on 2 sets

[HeathBar]

PM'd!

[joebob]

Wow. Lots more interest that I thought! I will be limited on material so I may cut the date off a lot sooner. Pretty much got all of my stock used up. Got most of the 40-60 size cut this morning. Couple of short jobs to do and then I'll get started on the rest. Will send a PM with PayPal info and total cost to those who PM'd me.

Thanks!

[joebob]

Actually ran out of material so I had to order some more. Figure while I'm at it, I may as well cut some servo arms, also. These are designed to be mounted to those round wheel type servo arms. Holes are spaced at .975, 1.75, and 1.375.

Set of 5 for $10. Same arrangement - PM me if you want any. I can add them to your order to save on shipping.