Working on something a little different

This is the place to hang and talk.

Working on something a little different

PostPosted: Tue Jan 19, 2021 11:48 am

Always wanted to build a wooden gear clock, getting some parts cut. I hope it actually works!
Attachments
9B4EE832-F6B5-4009-B027-A43A1ABDD6D7.jpeg
Doug G Designs & Kit Cutting
Doug G
Pro Bro
 
User avatar
 
Posts: 2469
Joined: Mon Nov 22, 2004 12:04 am
Location: Thompsons Station,TN

Remove Advertisements

TheProfileBrotherhood.com
Advertisement
 

Re: Working on something a little different

PostPosted: Tue Jan 19, 2021 12:00 pm

I think the Ailerons are too small...
I finally got to use that one!!
Looks awesome, keep us posted on the construction, please.
Near Binghamton, NY
Sabre 35
Mojo 40
Mojo 25
Boxxer (in-progress)
Primo 25 and Mojo 60 in the vault!
WIldcat Chip-Lite kit (unstarted)
Frank-STNY
Pro Bro
 
User avatar
 
Posts: 48
Joined: Mon Dec 24, 2012 10:41 pm

Re: Working on something a little different

PostPosted: Tue Jan 19, 2021 12:21 pm

Very nice. Please do keep us updated.
President of Chrisy Poos Kit Emoprium "The Leader in Quality Cut Short Kits at Hooks Pricing"

Glitter55, Big Tiddy 55cc, VH Giles202. Stashed stix60, stix50, stix46

Image
BalsaDust
Pro Bro
 
User avatar
 
Posts: 6912
Joined: Tue Feb 19, 2013 12:33 am
Location: Somewhere in the USA

Re: Working on something a little different

PostPosted: Tue Jan 19, 2021 3:19 pm

Kit it!!!
athol probro stickbangers club

"There is room in the Hood for everyone, but not everybody finds a home in the Hood"
- goofy-

"Best part is if you dork a harrier from a few feet up, it's like a decent CJ landing" -steener-
doinkedit
Pro Bro
 
User avatar
 
Posts: 2534
Joined: Fri Jul 08, 2011 4:13 pm
Location: Snake river idaho

Re: Working on something a little different

PostPosted: Tue Jan 19, 2021 3:45 pm

Will it hover?
The Argentinian Pro Bro!!!!!!!!!!!

And now proud member of the RMM.
gus
Pro Bro
 
User avatar
 
Posts: 13894
Joined: Wed Dec 15, 2004 1:26 pm
Location: Park City, UT

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 12:48 pm

Not even fly,i think. May last longer,well maybe not,both hanging around. :rofl: :rofl:
sparkplug
Pro Bro
 
Posts: 1282
Joined: Fri Apr 17, 2020 10:45 pm
Location: 1 mile from lake Thurmond 15miles north of augusta ga.

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 2:02 pm

Assembling those finely cut pieces should go like clockwork.
:hover: McDDD #415

˙ʇᴉ op oʇ ʍoɥ ʇno ǝɹnƃᴉɟ ʇ,uɐɔ I ʇnq 'looɔ sʞool ʇxǝʇ spɹɐʍʞɔɐq puɐ uʍop ǝpᴉsd∩
McDDD
Pro Bro
 
User avatar
 
Posts: 6004
Joined: Fri Aug 27, 2004 10:14 pm
Location: Eldon, MO

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 7:40 pm

McDDD wrote:Assembling those finely cut pieces should go like clockwork.


Good one Dave :D :D
My favorite maneuver... The Walk Of Shame.
iceman1
Pro Bro
 
User avatar
 
Posts: 1541
Joined: Sat Mar 31, 2007 1:50 am
Location: Foster City Calif

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 8:00 pm

All this support,just think if it was a airplane.
sparkplug
Pro Bro
 
Posts: 1282
Joined: Fri Apr 17, 2020 10:45 pm
Location: 1 mile from lake Thurmond 15miles north of augusta ga.

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 8:48 pm

Very neat project Doug. Looks " time " consuming. Lol. :wink:
cben
Pro Bro
 
User avatar
 
Posts: 772
Joined: Tue Jun 18, 2013 6:53 pm
Location: South Dakota

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 8:58 pm

cben wrote:Very neat project Doug. Looks " time " consuming. Lol. :wink:


Yipes another one..... :D :D
My favorite maneuver... The Walk Of Shame.
iceman1
Pro Bro
 
User avatar
 
Posts: 1541
Joined: Sat Mar 31, 2007 1:50 am
Location: Foster City Calif

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 9:45 pm

Cut a couple of Cigar Box guitar necks... with fretboard slots.

Have one or two ready for Nash 2021. I've been itching to build a reverb CBG with a dog bowl or paint can lid.
I can get a neck with frets installed from CBGitty for about $45. but I think you've got the file already worked out? I think you cut one or two a couple of years ago.
Doug B


To those in the military who serve, both past and present, to defend my freedoms, I thank you. I've had a wonderful life so far.
Doug B
Pro Bro
 
User avatar
 
Posts: 6060
Joined: Tue Jun 08, 2004 11:30 pm
Location: Indianapolis

Re: Working on something a little different

PostPosted: Wed Jan 20, 2021 10:09 pm

Did you cut this Doug, or have it cut?

I have a set of plans that I paid for a couple years ago for something I would love to build as well, but having the parts cut would sure be helpful.
Motowncali
Pro Bro
 
User avatar
 
Posts: 4340
Joined: Thu Oct 17, 2013 4:17 pm
Location: Crowley, TX

Re: Working on something a little different

PostPosted: Thu Jan 21, 2021 4:07 am

fret saw? you mean a zona or exacto razor saw? i actually used 1/32 m.w. and medium c.a. on the one i built years ago. never had one come off.
"you didn't add strength. you added WEIGHT"- w.f.
Wild Fred
Pro Bro
 
User avatar
 
Posts: 16368
Joined: Fri Jun 04, 2004 10:56 am
Location: sitting on the seawall fishing

Re: Working on something a little different

PostPosted: Thu Jan 21, 2021 3:08 pm

Motowncali wrote:Did you cut this Doug, or have it cut?

I have a set of plans that I paid for a couple years ago for something I would love to build as well, but having the parts cut would sure be helpful.

Yep, cut it all on the CNC router.
Doug G Designs & Kit Cutting
Doug G
Pro Bro
 
User avatar
 
Posts: 2469
Joined: Mon Nov 22, 2004 12:04 am
Location: Thompsons Station,TN

Re: Working on something a little different

PostPosted: Fri Jan 22, 2021 4:38 am

paint it orange!
Attachments
a-clockwork-orange.jpeg
"you didn't add strength. you added WEIGHT"- w.f.
Wild Fred
Pro Bro
 
User avatar
 
Posts: 16368
Joined: Fri Jun 04, 2004 10:56 am
Location: sitting on the seawall fishing

Re: Working on something a little different

PostPosted: Sat Jan 23, 2021 10:39 pm

worst movie ever made,bunch of pagans,set the goal for all the new bull. Wonder if that clock is ticking yet,or just hung up in time. You get that foam plane dusted off yet. Bout time WF fix up a new plane,all that time on his hands,he be making clocks next out of foam.
sparkplug
Pro Bro
 
Posts: 1282
Joined: Fri Apr 17, 2020 10:45 pm
Location: 1 mile from lake Thurmond 15miles north of augusta ga.

Re: Working on something a little different

PostPosted: Sun Jan 24, 2021 4:56 am

but it's coming true as we watch. no respect for authority, others, themselves. "wilding" is a thing. so is sucker punching random people on the street, etc. why? because we've raised kids since the 80's that have had no repercussions for their actions.


same with the zombie crap. it's actually happening, we got a bunch of brain dead zombies taking over. Don't believe me? go to the wal-mark.


and that teenage girl series, with the vampires and werewolves? can't remember the name. but really, the vampires are just like crackheads and the werewolves are the stoners.

actually working on rebuilding the first of 2 lt-40's that chuck asked me to fix a year ago. got a hankering to w.f. a foamy... g202 size/setup, real wing out of nice stuff. kinda like the e.e. 6, but not as hotrod.
"you didn't add strength. you added WEIGHT"- w.f.
Wild Fred
Pro Bro
 
User avatar
 
Posts: 16368
Joined: Fri Jun 04, 2004 10:56 am
Location: sitting on the seawall fishing

Re: Working on something a little different

PostPosted: Sun Jan 24, 2021 2:10 pm

The morals of a country sets its future,ours sucks. 202 with a real wing,now that be nice,go WF.
sparkplug
Pro Bro
 
Posts: 1282
Joined: Fri Apr 17, 2020 10:45 pm
Location: 1 mile from lake Thurmond 15miles north of augusta ga.

Re: Working on something a little different

PostPosted: Tue Jan 26, 2021 5:50 pm

What happen to the tic toc,hope its not hanging around,got to make room for foamy. Getting slow here again,some one building a dog house or something,maybe place to hang planes.
sparkplug
Pro Bro
 
Posts: 1282
Joined: Fri Apr 17, 2020 10:45 pm
Location: 1 mile from lake Thurmond 15miles north of augusta ga.

Next

Return to Pro Bro General Chat

Who is online

Users browsing this forum: No registered users and 9 guests