Servos for mojo 60 and 65

Please post site technical issues and problems here.

Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 5:37 pm

Any help please...

Thanks
rafaxddd
Pro Bro
 
Posts: 52
Joined: Fri May 25, 2012 3:07 pm
Location: Mexico City

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:11 pm

Well I went a little overboard....... in my MoJo 65 and after the 65 I put them in my MoAss 60...... HS 985MG, like 170 in oz @6v.......
bbellfly

To many to include, but a few....
Chinn Yak, Saito 72
Dura foamy, Eflite 450 Outrunner
MoAss 60, Saito 125
EF Profile Yak.....
Pacific Edge 540, Saito 100
Chinn Yak, NIB
bbellfly
Pro Bro
 
User avatar
 
Posts: 997
Joined: Wed Mar 26, 2008 8:56 pm
Location: Rome, GA

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:15 pm

bbellfly wrote:Well I went a little overboard....... in my MoJo 65 and after the 65 I put them in my MoAss 60...... HS 985MG, like 170 in oz @6v.......


In ailerons, rudder an elevator?

Thanks
rafaxddd
Pro Bro
 
Posts: 52
Joined: Fri May 25, 2012 3:07 pm
Location: Mexico City

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:17 pm

I forgot, the plane in your picture where you buy, what brand is?

Thanks again


rafaxddd wrote:
bbellfly wrote:Well I went a little overboard....... in my MoJo 65 and after the 65 I put them in my MoAss 60...... HS 985MG, like 170 in oz @6v.......


In ailerons, rudder an elevator?

Thanks
rafaxddd
Pro Bro
 
Posts: 52
Joined: Fri May 25, 2012 3:07 pm
Location: Mexico City

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:19 pm

Just what I meant when I built a list...
viewtopic.php?f=17&t=32421&hilit=Servos+again

- Case
2017: Half-Rack's experimental aircraft tour currently in planning phase 1.
ProBro miles logged:
2016: 0
2015: 13,199
2014: 6,051
2013: 2,502
2012: 1,242
Half-Rack
Pro Bro
 
User avatar
 
Posts: 4771
Joined: Sun Nov 20, 2011 10:50 pm

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:20 pm

all surfaces...... I build my own..... Do search for Dura Foamy......
bbellfly

To many to include, but a few....
Chinn Yak, Saito 72
Dura foamy, Eflite 450 Outrunner
MoAss 60, Saito 125
EF Profile Yak.....
Pacific Edge 540, Saito 100
Chinn Yak, NIB
bbellfly
Pro Bro
 
User avatar
 
Posts: 997
Joined: Wed Mar 26, 2008 8:56 pm
Location: Rome, GA

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:28 pm

Jr 8411 on all surfaces but rudder. 8711 there.
Image
Dr Constrictor
Pro Bro
 
User avatar
 
Posts: 9359
Joined: Fri Jul 15, 2005 6:47 pm
Location: Fuck em

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:38 pm

Hitec hs5645's on all my 60 & 65 size birds. They work well and don't break the bank. I use the hs5955tg's on my bigger stuff.
RIP Duke, Daddy loves you ALWAYS!
Thumbskull "Wulfie is the Liberace of ProBro's". RIP John, you are missed Brother.
Mchone Jake. "My gym teacher touched me! I didn't mind it"!
Evan Shadix. "wish apc had a trade in program"!
rcaircraftnut
Pro Bro
 
User avatar
 
Posts: 11660
Joined: Thu Feb 18, 2010 10:24 am
Location: Double Springs Al

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 6:46 pm

Thanks to all, i figure it out what should i pick...

RafaXDDD

Constrictor wrote:Jr 8411 on all surfaces but rudder. 8711 there.
rafaxddd
Pro Bro
 
Posts: 52
Joined: Fri May 25, 2012 3:07 pm
Location: Mexico City

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 8:40 pm

Constrictor wrote:Jr 8411 on all surfaces but rudder. 8711 there.



:roll: :roll: :roll: jeez,you and that fag gus :cash: :cash: :cash:
athol probro stickbangers club

"There is room in the Hood for everyone, but not everybody finds a home in the Hood"
- goofy-

"Best part is if you dork a harrier from a few feet up, it's like a decent CJ landing" -steener-
doinkedit
Pro Bro
 
User avatar
 
Posts: 2240
Joined: Fri Jul 08, 2011 4:13 pm
Location: north idaho

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 9:25 pm

doinkedit wrote:
Constrictor wrote:Jr 8411 on all surfaces but rudder. 8711 there.



:roll: :roll: :roll: jeez,you and that fag gus :cash: :cash: :cash:

Im not sure what you mean but ive found buying these top of the line servos used end up costing tons less than
Shit servos over their lifespan. These jr servos will never ever quit! Bottom line im cheaping out as cheap as
Possible by buying good servos.
Image
Dr Constrictor
Pro Bro
 
User avatar
 
Posts: 9359
Joined: Fri Jul 15, 2005 6:47 pm
Location: Fuck em

Re: Servos for mojo 60 and 65

PostPosted: Thu Sep 13, 2012 9:59 pm

Mojo 65

<==========

JR 8411 on ailerons, 8611 for the tail.





Constrictor wrote:
doinkedit wrote:
Constrictor wrote:Jr 8411 on all surfaces but rudder. 8711 there.



:roll: :roll: :roll: jeez,you and that fag gus :cash: :cash: :cash:

Im not sure what you mean but ive found buying these top of the line servos used end up costing tons less than
Shit servos over their lifespan. These jr servos will never ever quit! Bottom line im cheaping out as cheap as
Possible by buying good servos.



:tu:

















































:mrgreen:
The Argentinian Pro Bro!!!!!!!!!!!

And now proud member of the RMM.
gus
Pro Bro
 
User avatar
 
Posts: 13242
Joined: Wed Dec 15, 2004 1:26 pm
Location: Park City, UT


Return to Site Help

Who is online

Users browsing this forum: No registered users and 1 guest